90A 12V Starter Relay for DC Motor for Utility Sector

Simple Knowledge Dimension(mm) 32×35.5×16.5
Excess weight ( g ) ≈35g
Get in touch with Arrangement 1A/1B
Make contact with Content AgSnOtwo
Ambient Temperature -45~+85ºC
Vibration ten~50Hz,.075mm
Shock 1000m/s²,(100g)
Specification Knowledge Nominal Voltage 9~36VDC
Energy Usage <1.5W
Running Voltage 7.2V
Max. Motor Voltage 36V
Max. Switching Existing 90A
Surge Current 2500A/10ms
Motor Resistance(R±15%) 60Ω
Make contact with Voltage <60mV
Speak to Resistance <0.6mΩ
Dielectric Toughness Motor to Contact >4000VAC   1min
Throughout Open Get in touch with >2000VAC   1min
CZPTal Daily life >10000cycles
Mechanical Life >100000cycles
Pulse Time 100ms~150ms
Selecting-up Time <65ms
Release Time <65ms
Insulation Resistance >1000MΩ(500VDC)

          Cautions of Latching Relay:

             1.Recommendations of relay's enter
            (one)Polarity-Make sure you examine the polarity inside of our technological specification, if single coil then"+ -" or "- +"are fantastic,

            you can modify it by a single pulse.If double coil then it's needed to confirm "-+-" or "+-+"ahead of leaving the our factory.

            (two)Driving-Please energize the relay at our suggest pulse width, rated voltage for reputable overall performance, if one.five

            moments or two times of worth or decrease driving situation plz verify with our engineer.
            (three)Relays'contact position may be altered in the course of transportation or set up due to impact of external pressure,
            consequently please reset to the required status.


            2.Recommendations of relay's output
            (1)When deciding on the relay with tough link,remember to avoid the external pressure on load terminals during or following

            the set up.

            (2)When the relay will be linked with screw or bolts to the relays' terminals, plz make confident your relationship is

            mounted and avert relay from damages or other protection difficulties because of to temp. Increase..

            (three)The sampling signal wires of items are limited, remember to do not pull or torque during set up.

90A 12V Starter Relay for DC Motor for Utility Sector